Some tips about Air Compressors & Pneumatic Tools For You

Alright, today on my blog. I’m going to address a request from a viewer that I got back in January, and well, it’s June right now so I got to say I’m really sorry it took me this long to get to it. Alright, well today on my blog, we’re at the shipyard, and we’re going to talk about air compressors and pneumatic tools.

Some things you should know about air compressor

There is a serious compressor. So here’s a beautiful air compressor set up. That one’s just permanently mounted in the back of this service truck. You can see that it says thirty gallons. So there’s an engine mounted air compressor, direct-driven on the side of this fairly new Cummins diesel. Here’s a good sized tank on the back of this service truck. Alright now, speaking of air compressors, here’s a couple of “tow behind” air compressors made by the SULLAIR company.

This bigger one over here delivers a hundred and twenty-five pounds of pressure and four hundred and twenty-five cubic feet per minute – which is quite an impressive amount of air. You’d use that for sandblasting equipment or jackhammers – that kind of air operated equipment. When you go to choose best air compressor for you, what’s funny is that the first thing that you’ll see listed about it is the tank size – which in reality is the least important thing to do with the air compressor.

What’s really important is the pump size and the motor size. And the pump will be rated in cubic feet per minute. If you can’t find the rating for how many cubic feet per minute the air pump is going to make then it’s safe to say that you’re going to get three or four cubic feet per minute for every horsepower. A lot of hobbyist machines, the horsepower has been exaggerated by marketing departments in order to sell more.

If it’s a one-ten plugin then it’s not going to be more than two horsepower, otherwise, it will have a two-hundred and twenty-volt hook-up. You know the pressure rating on it again is not that important, they should all make at least ninety to a hundred and ten PSI. Now if you need higher pressure than ninety to a hundred and then you’re going to have to look at a two stage air compressor.

When you have a two-stage compressor you might have as high as a hundred and seventy-five PSI. So the duty cycle of your air compressor is one of the more important things that you can try and find out. The duty cycle is how long it’s rated to keep running during use. So if you have a hobbyist air compressor that’s duty cycle is fifty percent that means that fifty percent of the time you’re using it that motor can be running safely and without overheating. If you exceed fifty percent of the time when you’re in danger of wearing out your pump a lot faster than you had bargained for.

Commercial duty air compressors, on the other hand, have duty cycles of seventy-five percent and even a hundred percent. You don’t even need a tank if you’ve got an air compressor with a hundred percent duty cycle. So if you’re a hobbyist you know fifty percent duty cycle is probably all you need, but if you’re running a shop and you’ve got a lot of guys perhaps you’re going to want to look at something industrial with a seventy-five or even a hundred percent duty cycle.

A five horsepower compressor with a hundred percent duty cycle is going to make more air than a seven and a half horsepower compressor that only has a seventy-five percent duty cycle. If it is for commercial use you really should get as big a compressor as you can afford because you won’t be sorry. So to choose the right compressor you’re going to have to ask yourself what kind of demands you’re going to be making.

Should use air tools?

What are the air tools that you’re going to be using, what applications are you going to be using them for? Are they going to be more than one user at a time? Is it going to be intermittent use or is it going to be the continuous duty? Let’s go open my file folder of owner’s manuals and technical data. OK, this is three cubic feet per minute then just to operate this little right angle grinder. And a right angle drill this time, again, six cubic feet per minute. This little cut-off saw here four cubic feet per minute.

This is an air body-saw it’s basically a pneumatic hacksaw, great for doing bodywork. Six cubic feet per minute for this one. Alright, so this is an air hammer. It’s rated at ninety PSI of course and four point four cubic feet per minute. This pistol grip drill consumes four cubic feet per minute again rated at ninety PSI. Three eights impact gun that’s rated at four cubic feet per minute.

Another style three eights pneumatic wrench again rated at four cubic feet per minute. And four cubic feet per minute for this one as well. As far as my personal impact tools go, this is my heavy hitter and again it only uses four cubic feet per minute. One inch impact gun, you need a really good air supply to drive something like that. OK so now just a couple of drops of motor oil in the end of your tools.

Might be ten w thirty or fifteen forty or five thirty. You know, whatever’s around – straight thirty weight oil. Now I picked this little beauty up for twenty bucks. One gallon tank with a little tiny compressor on the back. Perfect for – you know, inflating bicycle tires or doing cleaning around the shop, that kind of work. You can’t really power any tools with something like this but for the money I paid for it, I don’t expect very much out of it.

If you want to know more tips Air Compressors & Pneumatic Tools, you can watch the video below to reference:

You can see I put a quick connect fitting on the end. Quick connect like that so you connect it, there now it’s already part of the system. Just pull back like that, snap it on, pull back and it comes off. So here are examples of three different fitting ends. Anyway, there are all kinds of different fitting ends that you might pick to go with your quick connector and I would recommend that you just look at the place where you work or what fittings came with the equipment you bought and just go with that. So don’t forget to wear your safety glasses and please remember what I always say about power tools – which is “use both hands and both eyes”.